FAQ

Welcome!

This community is for professionals and enthusiasts of our products and services. Share and discuss the best content and new marketing ideas, build your professional profile and become a better marketer together.

Hide Intro Register
Back
0

What is the Mini Tool Adapter (P# 10120) used for?

Avatar
Erick Royer
Stepcraft Attachments and Access

The Mini Tool Adapter is used to reduce the size of our 43mm x 20mm adapter down to an 8mm hole so you can use STEPCRAFT attachments like the Engraving Point, Plotting Pen or 3D Touch Probe, which all have an 8mm shank on them.

Alternatively you can use an 8mm Collet in your spindle (Just be sure to power the spindle OFF) when running these attachments.

This image has an empty alt attribute; its file name is mini-adapter-1.jpg
The Mini 20mm to 8mm tool adapter fits inside of the 43mm to 20mm adapter. Then you can insert the Engraving Point (or other 8mm attachment) directly to the 43mm tool holder on the STEPCRAFT CNC.
This image has an empty alt attribute; its file name is mini-adapter-2.jpg
This shows the Mini Tool Adapter nested inside the 43mm to 20mm adapter.
This image has an empty alt attribute; its file name is mini-adapter-3.jpg
Here is the assembled unit, ready to be installed into the STEPCRAFT CNC tool holder.
Avatar
Discard