Air Regulator
Description
The Air Regulation for the extraction consists of a two-parts adapter with which the intensity of the extraction can be easily adjusts. The extraction tube is being connected to one side while a vacuum cleaner, for example, is being attached to the other side of the device. With its conical construction it is suitable for all commercially available models. Adjust the air quantity on the nozzle by slightly twisting the Air Regulation and the workpiece stays where it should.
Technical Specifications of the STEPCRAFT M.500 CNC System
Machine's Footprint (Width, Length, Height) | 23" x 28.6" x 25.4" |
X-Travel | 13.7" (348 mm) |
Y-Travel | 21.4" (543.6 mm) |
Z-Travel | 7.63" (194 mm) |
Gantry Clearance (Z) | 8.07" (205 mm) |
Table Work Area (X, Y) | 20.2" x 25.6" (513 x 650.2 mm) |
Max Feed Rate | 283 in/min (120 mm/sec) |
Lead/Ball Screws | igus dryspin 12x5 mm (optional HIWIN ball screws 12x5 mm) |
Linear Drive | Bosch Rexroth ball bearing linear guides |
Stepper Motors | Sanyo Denki NEMA 23 (1 on X and Z and 2 on Y axes) |
Positional Accuracy/Repeatability | +/- 0.0009" (+/- 0.025 mm) w/igus dryspin +/- 0.0005" (+/- 0.015 mm) w/HIWIN ball screws |
Programmable Resolution | +/- 0.0002" (+/- 0.00625 mm) |
Backlash | +/- 0.0019" (+/- 0.05 mm) w/igus dryspin +/- 0.0012" (+/- 0.03 mm) w/HIWIN ball screws |
Weight | 48.5 lbs (22kg) |
Power Requirements | 110V-240V, 50-60 Hz, 180 watts (Comes with 110V USA plug) |
Interface | USB 2.0 / Parallel (LPT1) / Network RJ-45 |
Computer Requirements | PC with 1Ghz Processor (Laptop, Desktop or All-in-One), USB 2.0 interface, Windows 7 or higher (32/64 bit) OR MAC OS X 10.3.9 or higher with Windows emulation (Parallels or BootCamp) |
Scope Of Delivery
- The M-Series machine will arrive completely ready to run. If you ordered a DIY Kit then it will come with all necessary mechanical and electrical components.
- UCCNC control software
- UC100 Parallel to USB interface
- USB Cable
- Power supply with 110V USA power cable
- 3 x Flexi Guides™
- WERA Tool Set
- Operating Manual
- Detailed assembly manual
Required Tools
- WERA tool set (Included in the DIY Kit)
- 5.5 mm box wrench
- Wire Cutter
- Long-nose pliers
- Cutter Knife
- Digital Calipers
- 3-in-1 oil and grease
System Requirements
- PC with 1GHz processor
- USB Interface (Optional Ethernet)
- Windows XP or higher (32/64 bit)
- MAC OS X 10.3.9 or higher with Windows Emulation