Switch Box 2nd Layer Module for Laser

https://www.stepcraft.us/web/image/product.template/9/image_1920?unique=ebb1dc8

Switch Box 2nd Layer Module

49.99 49.99 USD 49.99

49.99

Not Available For Sale

    This combination does not exist.

    Description

    The 2nd Layer Module extends the connection possibilities of the Switch-Box.  With this, three more tools can be connected to the Switch-Box, so the device can operate five tools  total.  The circuit board has to be mounted into the housing of the controller box of the Switch-Box (plug & play). 
     
    *The 2nd layer module is required for use of the following tools with the Switch-Box...

    -DL445 Laser Engraver
    -Tangential Knife OTK-3

     
    Scope of Delivery: 

    • 1x 2nd Layer Module (circuit board)
    • 1x Connection Cable (flat conductor 10-pin)
    • 2x M3 Spacer
    • 1x Assembly Manual

    Technical Specifications of the STEPCRAFT M.500 CNC System

    Machine's Footprint (Width, Length, Height)23" x 28.6" x 25.4"
    X-Travel13.7" (348 mm)
    Y-Travel21.4" (543.6 mm)
    Z-Travel7.63" (194 mm)
    Gantry Clearance (Z)
    8.07" (205 mm)
    Table Work Area (X, Y)
    20.2" x 25.6" (513 x 650.2 mm)
    Max Feed Rate283 in/min (120 mm/sec)
    Lead/Ball Screwsigus dryspin 12x5 mm (optional HIWIN ball screws 12x5 mm)
    Linear DriveBosch Rexroth ball bearing linear guides
    Stepper MotorsSanyo Denki NEMA 23 (1 on X and Z and 2 on Y axes)
    Positional Accuracy/Repeatability
    +/- 0.0009" (+/- 0.025 mm) w/igus dryspin
    +/- 0.0005" (+/- 0.015 mm) w/HIWIN ball screws
    Programmable Resolution
    +/- 0.0002" (+/- 0.00625 mm) 
    Backlash
    +/- 0.0019" (+/- 0.05 mm) w/igus dryspin
    +/- 0.0012" (+/- 0.03 mm) w/HIWIN ball screws
    Weight
    48.5 lbs (22kg)
    Power Requirements
    110V-240V, 50-60 Hz, 180 watts 
    (Comes with 110V USA plug)
    Interface
    USB 2.0 / Parallel (LPT1) / Network RJ-45
    Computer Requirements
    PC with 1Ghz Processor (Laptop, Desktop or All-in-One), USB 2.0 interface, Windows 7 or higher (32/64 bit) OR MAC OS X 10.3.9 or higher with Windows emulation (Parallels or BootCamp)


    Scope Of Delivery

    • The M-Series machine will arrive completely ready to run.  If you ordered a DIY Kit then it will come with all necessary mechanical and electrical components. 
    • UCCNC control software
    • UC100 Parallel to USB interface
    • USB Cable
    • Power supply with 110V USA power cable
    • 3 x Flexi Guides™
    • WERA Tool Set
    • Operating Manual
    • Detailed assembly manual


    Required Tools

    • WERA tool set (Included in the DIY Kit)
    • 5.5 mm box wrench
    • Wire Cutter
    • Long-nose pliers
    • Cutter Knife
    • Digital Calipers
    • 3-in-1 oil and grease


    System Requirements

    • PC with 1GHz processor
    • USB Interface (Optional Ethernet)
    • Windows XP or higher (32/64 bit)
    • MAC OS X 10.3.9 or higher with Windows Emulation