Amana Tool 46100 Solid Carbide Spiral Plunge Tool 1/8 Dia x 1/2 x 1/4 Inch Shank Up-Cut

https://www.stepcraft.us/web/image/product.template/254/image_1920?unique=3531ca4

28.99 28.990000000000002 USD 28.99

28.99

Not Available For Sale

    This combination does not exist.

    Amana Tool 46100 Spiral Plunge 1/8" Diameter Up Cut

    Spiral-flute bits combine a shearing action in cutting with an augering action in chip clearance. The shearing action yields an especially clean accurate cut while the augering action clears chips from the cut.

    The ‘Up-Cut’ shears from the bottom up pulling chips from the bottom up thus allowing deeper penetration with less stress on the tool. An excellent choice for mortising. 

    Special unique carbide grade increased clearance geometry and razor-sharp cutting edges with polished flutes provide a superior finish and longer tool life especially in abrasive materials. Great for production settings and excellent for creating grooves and dado cuts in particleboard plywood and laminate. Primarily used on CNC machines and other automatic routers. Can be used with handheld and table-mounted portable routers.




    Technical Specifications of the STEPCRAFT M.500 CNC System

    Machine's Footprint (Width, Length, Height)23" x 28.6" x 25.4"
    X-Travel13.7" (348 mm)
    Y-Travel21.4" (543.6 mm)
    Z-Travel7.63" (194 mm)
    Gantry Clearance (Z)
    8.07" (205 mm)
    Table Work Area (X, Y)
    20.2" x 25.6" (513 x 650.2 mm)
    Max Feed Rate283 in/min (120 mm/sec)
    Lead/Ball Screwsigus dryspin 12x5 mm (optional HIWIN ball screws 12x5 mm)
    Linear DriveBosch Rexroth ball bearing linear guides
    Stepper MotorsSanyo Denki NEMA 23 (1 on X and Z and 2 on Y axes)
    Positional Accuracy/Repeatability
    +/- 0.0009" (+/- 0.025 mm) w/igus dryspin
    +/- 0.0005" (+/- 0.015 mm) w/HIWIN ball screws
    Programmable Resolution
    +/- 0.0002" (+/- 0.00625 mm) 
    Backlash
    +/- 0.0019" (+/- 0.05 mm) w/igus dryspin
    +/- 0.0012" (+/- 0.03 mm) w/HIWIN ball screws
    Weight
    48.5 lbs (22kg)
    Power Requirements
    110V-240V, 50-60 Hz, 180 watts 
    (Comes with 110V USA plug)
    Interface
    USB 2.0 / Parallel (LPT1) / Network RJ-45
    Computer Requirements
    PC with 1Ghz Processor (Laptop, Desktop or All-in-One), USB 2.0 interface, Windows 7 or higher (32/64 bit) OR MAC OS X 10.3.9 or higher with Windows emulation (Parallels or BootCamp)


    Scope Of Delivery

    • The M-Series machine will arrive completely ready to run.  If you ordered a DIY Kit then it will come with all necessary mechanical and electrical components. 
    • UCCNC control software
    • UC100 Parallel to USB interface
    • USB Cable
    • Power supply with 110V USA power cable
    • 3 x Flexi Guides™
    • WERA Tool Set
    • Operating Manual
    • Detailed assembly manual


    Required Tools

    • WERA tool set (Included in the DIY Kit)
    • 5.5 mm box wrench
    • Wire Cutter
    • Long-nose pliers
    • Cutter Knife
    • Digital Calipers
    • 3-in-1 oil and grease


    System Requirements

    • PC with 1GHz processor
    • USB Interface (Optional Ethernet)
    • Windows XP or higher (32/64 bit)
    • MAC OS X 10.3.9 or higher with Windows Emulation