M.1000 Stand

https://www.stepcraft.us/web/image/product.template/204153/image_1920?unique=d284494

799.00 799.0 USD 799.00

799.00

Not Available For Sale

    This combination does not exist.

    Description

    Take full advantage of the capabilities of your M-Series CNC system with the addition of our new Stand.  The design of the frame allows the enter center of the machine to have full exposure to the floor so you can take full advantage of the machine's vertical milling capabilities.  Projects that require box-end joints, dovetails or other joinery have never been easier to machine on a CNC.  Additionally, since the area inside the frame is fully open, you can also make custom fixtures to place larger objects under the machine to cut, carve or engrave on.  With the M-Series CNC, you are NEVER limited to just the bed size for your projects. 

    The M-Series Stands are constructed of 1/8" wall steel welded tube and finished with a gray, baked-on powder coating for a durable finish.  Each frame has four adjustable locking swivel casters so you can move your M-Series CNC around your shop with ease and lock it into place when in use.  The frame comes to you in four pieces and is quickly assembled with 8 bolts and nuts.  It can be shipped via UPS or included in the crate with new machine orders. 

    Scope of Delivery

    • Two welded end frame hoops

    • 2 welded I Cross Beams

    • Hardware

    • Casters

    Technical Specifications of the STEPCRAFT M.500 CNC System

    Machine's Footprint (Width, Length, Height)23" x 28.6" x 25.4"
    X-Travel13.7" (348 mm)
    Y-Travel21.4" (543.6 mm)
    Z-Travel7.63" (194 mm)
    Gantry Clearance (Z)
    8.07" (205 mm)
    Table Work Area (X, Y)
    20.2" x 25.6" (513 x 650.2 mm)
    Max Feed Rate283 in/min (120 mm/sec)
    Lead/Ball Screwsigus dryspin 12x5 mm (optional HIWIN ball screws 12x5 mm)
    Linear DriveBosch Rexroth ball bearing linear guides
    Stepper MotorsSanyo Denki NEMA 23 (1 on X and Z and 2 on Y axes)
    Positional Accuracy/Repeatability
    +/- 0.0009" (+/- 0.025 mm) w/igus dryspin
    +/- 0.0005" (+/- 0.015 mm) w/HIWIN ball screws
    Programmable Resolution
    +/- 0.0002" (+/- 0.00625 mm) 
    Backlash
    +/- 0.0019" (+/- 0.05 mm) w/igus dryspin
    +/- 0.0012" (+/- 0.03 mm) w/HIWIN ball screws
    Weight
    48.5 lbs (22kg)
    Power Requirements
    110V-240V, 50-60 Hz, 180 watts 
    (Comes with 110V USA plug)
    Interface
    USB 2.0 / Parallel (LPT1) / Network RJ-45
    Computer Requirements
    PC with 1Ghz Processor (Laptop, Desktop or All-in-One), USB 2.0 interface, Windows 7 or higher (32/64 bit) OR MAC OS X 10.3.9 or higher with Windows emulation (Parallels or BootCamp)


    Scope Of Delivery

    • The M-Series machine will arrive completely ready to run.  If you ordered a DIY Kit then it will come with all necessary mechanical and electrical components. 
    • UCCNC control software
    • UC100 Parallel to USB interface
    • USB Cable
    • Power supply with 110V USA power cable
    • 3 x Flexi Guides™
    • WERA Tool Set
    • Operating Manual
    • Detailed assembly manual


    Required Tools

    • WERA tool set (Included in the DIY Kit)
    • 5.5 mm box wrench
    • Wire Cutter
    • Long-nose pliers
    • Cutter Knife
    • Digital Calipers
    • 3-in-1 oil and grease


    System Requirements

    • PC with 1GHz processor
    • USB Interface (Optional Ethernet)
    • Windows XP or higher (32/64 bit)
    • MAC OS X 10.3.9 or higher with Windows Emulation