Magnetic Pillars for Milling Bath (Set of 5)

https://www.stepcraft.us/web/image/product.template/232/image_1920?unique=ebb1dc8

34.99 34.99 USD 34.99

34.99

Not Available For Sale

    This combination does not exist.

              Description

               With these five additional Magnetic Pillars especially plates with smaller sizes can be secured safely and easily in the Milling Bath.

              Technical Specifications:

              • Holding Force: 50 N

              • Water resistant

              Scope of Delivery:

              • 5X Magnetic Pillar with washer and nut

               

              Technical Specifications of the STEPCRAFT M.500 CNC System

              Machine's Footprint (Width, Length, Height)23" x 28.6" x 25.4"
              X-Travel13.7" (348 mm)
              Y-Travel21.4" (543.6 mm)
              Z-Travel7.63" (194 mm)
              Gantry Clearance (Z)
              8.07" (205 mm)
              Table Work Area (X, Y)
              20.2" x 25.6" (513 x 650.2 mm)
              Max Feed Rate283 in/min (120 mm/sec)
              Lead/Ball Screwsigus dryspin 12x5 mm (optional HIWIN ball screws 12x5 mm)
              Linear DriveBosch Rexroth ball bearing linear guides
              Stepper MotorsSanyo Denki NEMA 23 (1 on X and Z and 2 on Y axes)
              Positional Accuracy/Repeatability
              +/- 0.0009" (+/- 0.025 mm) w/igus dryspin
              +/- 0.0005" (+/- 0.015 mm) w/HIWIN ball screws
              Programmable Resolution
              +/- 0.0002" (+/- 0.00625 mm) 
              Backlash
              +/- 0.0019" (+/- 0.05 mm) w/igus dryspin
              +/- 0.0012" (+/- 0.03 mm) w/HIWIN ball screws
              Weight
              48.5 lbs (22kg)
              Power Requirements
              110V-240V, 50-60 Hz, 180 watts 
              (Comes with 110V USA plug)
              Interface
              USB 2.0 / Parallel (LPT1) / Network RJ-45
              Computer Requirements
              PC with 1Ghz Processor (Laptop, Desktop or All-in-One), USB 2.0 interface, Windows 7 or higher (32/64 bit) OR MAC OS X 10.3.9 or higher with Windows emulation (Parallels or BootCamp)


              Scope Of Delivery

              • The M-Series machine will arrive completely ready to run.  If you ordered a DIY Kit then it will come with all necessary mechanical and electrical components. 
              • UCCNC control software
              • UC100 Parallel to USB interface
              • USB Cable
              • Power supply with 110V USA power cable
              • 3 x Flexi Guides™
              • WERA Tool Set
              • Operating Manual
              • Detailed assembly manual


              Required Tools

              • WERA tool set (Included in the DIY Kit)
              • 5.5 mm box wrench
              • Wire Cutter
              • Long-nose pliers
              • Cutter Knife
              • Digital Calipers
              • 3-in-1 oil and grease


              System Requirements

              • PC with 1GHz processor
              • USB Interface (Optional Ethernet)
              • Windows XP or higher (32/64 bit)
              • MAC OS X 10.3.9 or higher with Windows Emulation