Home └STEPCRAFT UCCNC Training Course
STEPCRAFT UCCNC Training Course

STEPCRAFT UCCNC Training Course

This course will walk you through STEPCRAFT's UCCNC machine control software. Every function will be covered in detail.

Private Course
Please sign in to contact responsible.
Last Update 02/15/2023
Completion Time 3 hours 59 minutes
  • Introduction
  • Digital Read Out (DRO)
    • DRO - Homing Your Machine
    • DRO - Homing Each Axis Individually
    • DRO - Using The Double Home-All Button
    • DRO - Manually Moving The Gantry
    • DRO - Manually Moving The Gantry Using Relative Coordinates
    • DRO - Moving To Absolute Coordinates
    • DRO - TIP Recording Absolute Coordinates At The Start Of a Job
    • DRO - Zeroing Your Workpiece
    • DRO - Pre-Programmed Position Buttons (M Center, Back and Zero)
  • G-Code Preview Window
    • G-Code Preview Window
  • Job Preview Window
    • Job Preview Window
  • Manual Feed and Speed Override
    • Adjusting The Feeds And Speeds While The Job Is Running
  • Running Jobs
    • Warmup Procedure
    • Loading And Closing Job Files
    • Starting, Stopping And Pausing Your Jobs
    • The Goto Zero Button
    • Using The Job Timer
    • Using Run From Here
    • The Status Window
    • Using The Spindle On/Off Button
  • Safety Features
    • Enclosure Safety On Checkbox
  • Automatic Tool Changer & Manual Tool Changing
    • Using The Tool Length Sensor (TLS) Button
    • The ATC On/Off Button And Changing Tools
    • Setting Tool Offsets
    • Resetting The Tool Rack
    • Using The Manual Tool Change Button
  • 3D Touch Probe
    • Locating The Corner Of Your Workpiece
    • Locating The Edge Of A Workpiece
    • Probing The Top Of Your Workpiece
    • Locating The Center Of A Rectangle Or Square (Outside Probing)
    • Locating The Center Of a Round Object (Outside Probing)
    • Locating The Center Of A Circle Or Rectangle (Inside Probing)
    • Aligning Your Job To An Angled Workpiece
    • Locating Your Tool's Z Zero in Pockets And Other Difficult Surfaces
  • Dealing With Errors
    • Using The Override Limits Button
    • Understanding Soft Limits And Related Errors
  • Advanced Functionality
    • The Programmable Position Buttons (P1-P3)
    • User Macros (1-5)
    • Using The Offline Mode Button
    • Macro Tips Off Explained
    • The Mist Coolant Button
    • What Is Dwell Time?
    • Using the MDI
    • Work Coordinate System (G54-G59) Explained